pcary@bw.edu
New Member
- Messages
- 4
- Reaction score
- 0
- Points
- 0
Hi there - I'm trying to eliminate leaks under a reinstalled bathroom vanity. There's one slowly leaking joint, just inside the back wall of the vanity, where the PVC under the sink goes into black plastic that I assume is ABS. I have not taken this joint apart and I'm wondering whether it is likely a threaded joint or a glued one (or something else). It's the joint in the background of the attached photo. Should I try unscrewing the PVC pipe or is it more difficult than that?
Thanks,
Paul (homeowner)
pcary@bw.edu
Thanks,
Paul (homeowner)
pcary@bw.edu