jacuzzi 6060 corner tub

Users who are viewing this thread

VApops

New Member
Messages
1
Reaction score
0
Points
0
I have a drain plug that will not remain open to drain, does anyone have an idea of what can be done besides proping it open?
 

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,770
Reaction score
1,190
Points
113
Location
New England
Is this a cable operated valve with a knob at the overflow to open and close it? Sometimes, you have to make the operation stiffer. One manufacturer I talked to said to take some nylon tie-wraps and basically tie the cable off to the drain to put a mild kink in it. This will add some friction and allow it to stay up rather than being sucked down. It takes a little trial and error to get it stiff enough without being too stiff. If you don't have an access panel, lots of luck. Adjust it as high as you can get it.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks