(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 1 of 1

Thread: Flush Mechanism Problem on Caroma Dual Flush

Hybrid View

  1. #1
    DIY Junior Member mommiemel's Avatar
    Join Date
    Jan 2009
    Location
    Wisconsin
    Posts
    1

    Default Flush Mechanism Problem on Caroma Dual Flush

    My hubby and I recently installed a Caroma Sydney dual flush toilet in our bathroom, and I'm puzzled by a problem.

    When I look into the tank, there's a square piece that rocks. If it sits in a horizontal position, and I use the full flush button, that works fine. But if I use the half flush button, that piece rocks (so it activates just using the half flush), and it doesn't reseat itself into the horizontal position. Unless I take the lid off and reset the piece manually to the horizontal position, we have to hold the button down to make it flush. It seems as though I'm missing a piece that would force that rocking part to return to a horizontal position, but I can't find a diagram anywhere that would help me figure this out. Does anyone have any suggestions?

    Thanks.

    ~Mel

    Click here to view Caroma product information and installation


    Inside the Caroma Sydney tank
    Last edited by Terry; 04-23-2009 at 10:30 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •