My hubby and I recently installed a Caroma Sydney dual flush toilet in our bathroom, and I'm puzzled by a problem.
When I look into the tank, there's a square piece that rocks. If it sits in a horizontal position, and I use the full flush button, that works fine. But if I use the half flush button, that piece rocks (so it activates just using the half flush), and it doesn't reseat itself into the horizontal position. Unless I take the lid off and reset the piece manually to the horizontal position, we have to hold the button down to make it flush. It seems as though I'm missing a piece that would force that rocking part to return to a horizontal position, but I can't find a diagram anywhere that would help me figure this out. Does anyone have any suggestions?
Click here to view Caroma product information and installation
Inside the Caroma Sydney tank
Last edited by Terry; 04-23-2009 at 10:30 AM.