Toilet tank will not refill properly

M

mdsmeck

New Member

Messages

4

Reaction score

0

Points

0

• Jan 9, 2009

• #1

After flushing our toilet, the tank will not refill...

If I turn off the valve that supplies the water and turn it back on it works...

I do have a replacement Fluidmaster 400A Refill Valve, but wanted to see if anyone had any suggestions before I replace it...

Thanks In Advance...

Mike...

 

Jadnashua

Retired Defense Industry Engineer xxx

Messages

32,770

Reaction score

1,190

Points

113

Location

New England

• Jan 9, 2009

• #2

Did you use a Watts FloodSafe supply hose? If so, replace it with a conventional one and everything will work fine.

 

Sponsor

Paid Advertisement

• 1 minute ago

• Add bookmark
• ##

 

M

mdsmeck

New Member

Messages

4

Reaction score

0

Points

0

• Jan 9, 2009

• #3

Nope - Just a plastic hose from the valve shutoff to the fill valve...

Mike...

 

hj

Master Plumber

Messages

33,603

Reaction score

1,042

Points

113

Location

Cave Creek, Arizona

Website

www.terrylove.com

• Jan 9, 2009

• #4

400a

IF the two valves are the same, just remove the top from the new one, or go to HD and buy a new replacement cap, and install it on the old valve.

 

M

mdsmeck

New Member

Messages

4

Reaction score

0

Points

0

• Jan 9, 2009

• #5

Just noticed something else - Seems like some type of pressure issue as if you turn on the bath tub cold water, then the fill valve starts working???

Any ideas???

Mike...

 

M

mdsmeck

New Member

Messages

4

Reaction score

0

Points

0

• Jan 9, 2009

• #6

Replaced the filler valve and all is good now...

Thanks for the reply...

Mike...