HarleySilo
New Member
I’m turning my pantry into a half bath, and turning a laundry closet into a laundry closet/pantry.
In the half bath I’m ready to do the plumbing.
My house is a ranch with a full basement and an attic room with bath. Basement is unfinished with 90% of the plumbing exposed.
What I was planning on doing was using an AAV for this new sink, and then a 2” vent for the toilet. I was planning on running it straight up through the wall an into the attic and through the roof. I am also considering extending a 1.5“ vent line up through the wall and into the attic for the sink and then connect it horizontally to the toilet vent line.
Possible I could connect horizontally in the attic to the existing Washer dryer 2” vent? AAV seems easier for the sink. I’ll try and draw a diagram to clear up any confusion and post shortly.
Here is the tail end of the branch this is connecting too, this shows two drains for kitchen sink and the line to the laundry room and one hell of an awesome clock and light.
Here's the plumbing layout.
What I'm trying to determine is:
Will I cause any violations as to code? If so what…..
Am i doing something stupid or plain wrong?
Surely there is a better idea? What is it?
In the half bath I’m ready to do the plumbing.
My house is a ranch with a full basement and an attic room with bath. Basement is unfinished with 90% of the plumbing exposed.
What I was planning on doing was using an AAV for this new sink, and then a 2” vent for the toilet. I was planning on running it straight up through the wall an into the attic and through the roof. I am also considering extending a 1.5“ vent line up through the wall and into the attic for the sink and then connect it horizontally to the toilet vent line.
Possible I could connect horizontally in the attic to the existing Washer dryer 2” vent? AAV seems easier for the sink. I’ll try and draw a diagram to clear up any confusion and post shortly.
Here is the tail end of the branch this is connecting too, this shows two drains for kitchen sink and the line to the laundry room and one hell of an awesome clock and light.
Here's the plumbing layout.
What I'm trying to determine is:
Will I cause any violations as to code? If so what…..
Am i doing something stupid or plain wrong?
Surely there is a better idea? What is it?
Last edited by a moderator: