bbbluueyes
New Member
- Messages
- 17
- Reaction score
- 0
- Points
- 0
Hi- thank you very much in advance-
While removing an old (i.e. 60's) bathroom sink and faucet, the pipe going into the wall would not come out. After tugging, cutting, etc.. the pipe old pipe, meaning the pipe that was originally attached to the trap, is now flush with the wall.
Is there a possible way to remove this without tearing up the wall?
Thanks again~
Paul
While removing an old (i.e. 60's) bathroom sink and faucet, the pipe going into the wall would not come out. After tugging, cutting, etc.. the pipe old pipe, meaning the pipe that was originally attached to the trap, is now flush with the wall.
Is there a possible way to remove this without tearing up the wall?
Thanks again~
Paul