(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: CENTIPRO control box problems for Red Jacket

  1. #1

    Default CENTIPRO control box problems for Red Jacket

    I have a Red jacket 3/4 HP three wire pump and had the Control box go bad. I was advised to replace it with a Centipro CB07412CR box from a Red Jacket dealer. I installed the first and second one that ran for about 2 hours and then went bad. Are the Centipro boxes compatable with Older Red Jackets?
    Do you have any suggestions what would solve the problem? We are trying everything short of pulling the pump.
    Last edited by weistart; 12-16-2008 at 09:11 PM.

  2. #2
    Moderator valveman's Avatar
    Join Date
    Mar 2006
    Location
    Lubbock, Texas
    Posts
    4,174

    Default

    Red Jacket used to have Franklin motors. If your old control was a Franklin, then you should replace it with a Franklin box.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •