(206) 949-5683, Top Rated Plumber, Seattle
Page 1 of 2 12 LastLast
Results 1 to 15 of 44

Thread: 2 1/2 gal undersink heater - use hot or cold supply?

Hybrid View

  1. #1
    DIY Senior Member AcidWater's Avatar
    Join Date
    Oct 2008
    Location
    .
    Posts
    123

    Default 2 1/2 gal undersink heater - use hot or cold supply?

    Since the purpose of the under sink lav water heater is to prevent wasting hot water, it seems to me that I should hook it to the cold supply. Otherwise, hot water will flow into the supply line and cool down, wasting it.

    OTOH, is 2 1/2 gallons enough for a woman to wash her face, get her makeup off, etc? Maybe I'll have to crank up the thermostat setting a bit?

    If she's going to use up more than a tank, then I'll need to hook it to the hot supply.

  2. #2
    DIY Senior Member gardner's Avatar
    Join Date
    Apr 2007
    Location
    Ontario
    Posts
    217

    Default comment from the ignorant

    My totally uneducated opinion would be hot.

    In my house the run from the tank to the tap is pretty long, so if you want a cup of hot water you have to run the hot for 60 seconds before you get warm and 90 secs before it is really hot. Getting a cup of water forces the water heater to heat 6 gallons.

    What you are saving is that 90 seconds of running and the time it takes to warm up those pipes so the water is hot. The run time to get full heat drops to maybe 10 seconds and 1/2 gallon and though you heat the water twice, you heat way less than twice as much of it.

    When you're filling the tub or running a lot of hot for dishes or something, you will wind up drawing from the main tank and get lots of hot to work with.

    I have no idea whether it is actually kosher to feed hot into the inlet of a small electric tank, so that's something I'd be interested in.

  3. #3
    Master Plumber Redwood's Avatar
    Join Date
    Dec 2007
    Location
    Connecticut
    Posts
    7,463

    Default

    I would consider a recirculation system.

  4. #4
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Location
    Yakima WA
    Posts
    7,246

    Default

    I concur with Redwood. I plumbed in a recirculating pump 3 or 4 years ago and it's great. Instant hot water anytime and as much as I want anywhere in the house.

  5. #5

    Default

    Quote Originally Posted by Gary Swart View Post
    I concur with Redwood. I plumbed in a recirculating pump 3 or 4 years ago and it's great. Instant hot water anytime and as much as I want anywhere in the house.

    How many times in a day do you need "instant" hot water? What a costly and energy wasting feature!

  6. #6
    Master Plumber Redwood's Avatar
    Join Date
    Dec 2007
    Location
    Connecticut
    Posts
    7,463

    Default

    Grundfos Comfort System - Hot Water Recirculation System

    This unit recirculates cooled off hot water into the cold supply side with a thermostat valve that controls the flow so hot water is not wasted. It may be tied to a timer or, occupancy sensor for additional savings. Insulate the hot supply lines for additional savings.

    It's more economical than you think!

  7. #7
    DIY Senior Member AcidWater's Avatar
    Join Date
    Oct 2008
    Location
    .
    Posts
    123

    Default

    The tank is under the sink. Hot or cold???
    ***

    Recirc constantly wastes money.

  8. #8
    Master Plumber Redwood's Avatar
    Join Date
    Dec 2007
    Location
    Connecticut
    Posts
    7,463

    Default

    Compared to buying & running a second water heater its nothing!

  9. #9

    Default

    Quote Originally Posted by Redwood View Post
    Compared to buying & running a second water heater its nothing!

    Since when is a recirc retrofit inexepensive to install and operate?

  10. #10
    Plumber Winslow's Avatar
    Join Date
    Dec 2005
    Location
    Hawaii
    Posts
    450

    Default

    Quote Originally Posted by Ladiesman271 View Post
    Since when is a recirc retrofit inexepensive to install and operate?
    you don't need to run a new line. The make a retrofit model where the pump goes on the heater and a bypass goes on the fixture at the end of the line or the fixture ou want instant hot water at.

  11. #11
    DIY Senior Member gardner's Avatar
    Join Date
    Apr 2007
    Location
    Ontario
    Posts
    217

    Default

    If the recirulation systems put the feedback into the cold inlet, then I guess it is fair play to feed hot water into the cold inlet of a water heater. Is that right?

    If you wanted to double up your tanks for extra capacity, would you feed them in series like this?

  12. #12
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Location
    Yakima WA
    Posts
    7,246

    Default

    I'll bet the farm that I can operate my recirculating system for 100 years for the price of just one of your under sink heaters and have instant hot water everywhere in the house not just in the bathroom where the under sink heater is located.

  13. #13
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,412

    Default

    Feeding hot into the inlet of a WH won't hurt it...
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  14. #14
    Plunger/TurdPuncher kingsotall's Avatar
    Join Date
    Aug 2008
    Location
    Flagstaff, AZ Sitting on an upside down 5 gallon bucket next to the GO 68HD
    Posts
    1,260

    Default

    acidwater, have you looked into one of these puppies┐

    Price of tea in China... hehe

  15. #15
    DIY Senior Member WV Hillbilly's Avatar
    Join Date
    Aug 2008
    Location
    WV
    Posts
    178

    Default

    Hot or Cold . I don't know if you'd get enough hot water using the cold supply or not but I'd try that first . If it didn't work I'd switch to the hot supply . Cutting the small faucet supply pipes above the shutoff valves , using flexible copper tubing & compression fittings it wouldn't take much to hook it up or switch supplys if necessary . You'd likely need reducers to connect the tubing to the inlet & outlet of the tank .
    Last edited by WV Hillbilly; 12-11-2008 at 01:14 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •