(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Need design system for Irrigation

  1. #1
    DIY Junior Member DGM_Jakarta's Avatar
    Join Date
    Dec 2008
    Location
    Indonesia
    Posts
    17

    Default Need design system for Irrigation

    The project are for planting the rice seed.
    Actually i need someone to help me design the irrigation system so i can choose the right pump and the right system. the area of the rice seed divided by two pumps, one pumps are for 2,7 Km 20" PVC Pipe, and the other pump are for 4,3 Km 20" PVC Pipe, can anyone help me to calculate and design the pump system so i can get the output of 150 Liter/second and pressure at 4 Bar.
    is it possible if we use two or three pump in one pipe system like an estafet one push the water to its full head and full capacity at the end we use another pump to help boost the water. Thank you

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,630

    Default pump

    That system is going to cost enough money, that you should be able to afford a mechanical engineer to do the calculations and make a recommendation. All we could tell you is get the biggest pump you can afford. Anything else we would recommend might be inadequate.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •