(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Watts Adjustable Floor Cleanout

  1. #1
    DIY Junior Member Shinshi's Avatar
    Join Date
    Feb 2008
    Location
    Alberta
    Posts
    22

    Default Watts Adjustable Floor Cleanout

    I am trying to figure out the best way to make a basement floor cleanout to be as unobtrusive as possible. I would like to set it in the concrete and ensure that it will allow for a flush surface after the subfloor is installed. I am considering a Watts adjustable floor cleanout like a CO-200-R.

    http://www.watts.com/pdf/ES-WD-CO-200-R.pdf

    This seems to be the best option, even if not the cheapest. It would allow me to set the body of the unit in the concrete and then adjust the bronze top to be flush with the finished floor.

    Does anyone have any better or cheaper ideas that would accomplish the same thing?

    I do have a question about this type of cleanout from Watts. I have ABS black pipe for the plumbing and I wonder if it is compatible with this cast iron body. Can I use a vertical ABS black pipe and attach it to this cast iron body or would I have to order the optional ABS version of this body?

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,605

    Default co

    You can attach it with a plastic to cast iron transition coupling, (or a No-Hub one if your inspector allows it. not all will accept the No-Hub.)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •