(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: American Standard Mod. 2425 L Install

  1. #1

    Default American Standard Mod. 2425 L Install

    hey guys,
    i just brought my tub home and after reading the instructions i have a couple of questions.
    1. how large of an area does the mortar base need to be?
    the instruction say the entire tub base needs to be supported but does give you an idea how large to make the mortar base.
    2. How deep does the mortar base need to be to make good contact with the bottom of the tub?

    any other inputs or advise would be GREATLY appreciated>
    Thanks

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,195
    Blog Entries
    1

    Default

    If you use mortar under the tub, I like to keep the gap about an inch between the floor and base of the tub.

    Then I put a few small piles of mortar down and quickly drop the tub, squishing the piles out some.

    The worst thing is to try to lay mortar evenly, and then find that it is so solid that the tub won't drop down into it.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •