(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: jet pump

  1. #1

    Default jet pump

    HI,
    I am new to this. I have a 2hp Goulds jet pump for a sprinkler system. My low pressure is set at 40 and high pressure is set at 40. The problem is the pump clicks off after reaching 60...the the pressure goes down to 40 and it clicks back on....it clicks of and on about once every thirty seconds. How do I get the pump to keep running without clicking on and off so much?
    Rugged

  2. #2
    That's all folks! Gary Slusser's Avatar
    Join Date
    Aug 2004
    Location
    Wherever I park the motorhome.
    Posts
    6,792

    Default

    I think you meant to say the switch is adjusted to on at 40 off at 60.

    If you don't want the pump to go off while the spriklers are running, adjust the switch to 40/70 or 75 or 80 by tightening the short screw's nut and that will allow the pump to run as long as the sprinklers don't allow the pump to get to 80.

    Gary
    Quality Water Associates

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •