How can I increase the temp of my Mix-it valve.

Users who are viewing this thread

Gabe

New Member
Messages
3
Reaction score
0
Points
0
I had a new bathroom built in June. All new construction. I noticed that the hot water in the shower is not as hot as the sink. The contractor installed a new Delta mix-it valve. I turned up the temperature at the water heater as instructed by the plumber but there is no real change. What should I do to get the water temperature to increase. :confused::confused:
 

Winslow

Plumber
Messages
445
Reaction score
0
Points
0
Location
Hawaii
I had a new bathroom built in June. All new construction. I noticed that the hot water in the shower is not as hot as the sink. The contractor installed a new Delta mix-it valve. I turned up the temperature at the water heater as instructed by the plumber but there is no real change. What should I do to get the water temperature to increase. :confused::confused:


Behind the handle there is going to be a temp limit/ scaldguard stop. adjust it to allow the handle to turn further to the hot position
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks