boilermate 2000 smartcontrol shot - need quick fix

Users who are viewing this thread

baxter

New Member
Messages
1
Reaction score
0
Points
0
hello - we have a amtrol boilermate 2000, the smartboard is shot, would like to know how i can wire the aquastat and eliminate the smartboard on the boilermate as a quick fix till new smartboard gets delivered - thanks
 

NHmaster

Master Plumber
Messages
3,176
Reaction score
5
Points
0
Location
S. Maine
ECT contols and Johnson controls both make electronic aquastats with a temperature range that you need. removing the old probe is the hard part because you need to drain and tip the tank over to do it. Once installed you can pretty much cancel the new board as either one of those controls will do the same thing just fine.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks