Doug Parsons
New Member
- Messages
- 1
- Reaction score
- 0
- Points
- 0
I'm trying to replace old defective transformer for under counter lighting. Purchased a replacement type with same input/output specs--120V AC to 12V AC 150W. New transformer has typical incoming Black/White leads but output only has two red leads. Question is: How to wire for proper operation. The incoming power line is operated by wall toggle switch which comes to transformer. There are two sections of under counter lights operated by the same transformer. However, the pair of wires for each under counter light system are both white. Not sure how to properly wire both sides with only two 12V hot leads.
Thanks for suggestions.
Doug
Thanks for suggestions.
Doug