Shower Valve Recommendations

Users who are viewing this thread

K2

Member
Messages
78
Reaction score
0
Points
6
Location
Delridge Valley
Website
www.draghead.com
Hello guys, any recommendations for rough shower valves? Looking for quality, price is trivial...

It will supply just the shower, no tub/no diverter necessary.
 

bathlady

New Member
Messages
11
Reaction score
1
Points
0
Location
Maryland
We like the Grohe thermostatic valves that we recently put in both a tub/shower and a shower only.
 

Gary Swart

In the Trades
Messages
8,101
Reaction score
84
Points
48
Location
Yakima, WA
For what it's worth, I recently installed a new Delta universal valve with 1700 trim, and it is excellent! I would suggest you not buy any valve from a box store, I believe the sell a cheapo version of the good ones.
 

topshot

New Member
Messages
45
Reaction score
0
Points
0
Location
Indiana
Am I correct in thinking the 1700 series long handle does not do the temp but the pressure? Temp looks like the inner dial/knob. How easy is it to fine tune the temp over the years?

We do NOT want the single-function kind where you need to turn through cold then warm then hot, which seems to be the way the 1300 and some of the 1400 series are. We don't really care about pressure, but is the 1700 the only way to get that now? Don't they make ones like kitchen faucets anymore (those "crystal balls" you rotated for temp, but you lifted for volume control)?

We also want the same kind for bath and kitchen sinks.
 

Gary Swart

In the Trades
Messages
8,101
Reaction score
84
Points
48
Location
Yakima, WA
You are thinking right. Turn the water on/off with the long handle and that will also regulate the amount of flow. The water will be at the temperature the anti-scald is adjusted to. You can turn the temperature down with the small handle (more like a knob than handle) but you can't exceed the high temperature. Readjusting the high temperature for the anti-scald is simple enough, but it did take some trial and error at least for an non professional like me.
 

hj

Master Plumber
Messages
33,603
Reaction score
1,042
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
valves

The manufacturer's consensus seems to be either,
1. Turn the volume on to the maximum and then adjust the temperater to suit every time you turn the faucet on. Or,
2. Have a means of presetting the temperature and then use the main control to adjust the volume.
3. Moentrol valves may the closest to what you are familiar with in that you can rotate the handle to the approximate temperature while you are pulling out on it to turn the water on.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks