sibi1972
New Member
- Messages
- 32
- Reaction score
- 0
- Points
- 0
Guys,
I have a Beckett AFG gun and the air settings are closed. Beckett used to have a chart included with the gun for these settings but no longer does. The install directions say I need to check the exhaust gasses to set this up and I have no idea what I need to be able to do that.
I'm thinking I can open them about 1/3 of the way just to get it running for a system test THEN call in a boiler service guy to set this up for me.
What do you think, will this plan be OK?
Or is there a rough setting based on the gun and nozzle that I can use and be close enough to the ball park?
Thanks for any help you can lend here.
Sibi
I have a Beckett AFG gun and the air settings are closed. Beckett used to have a chart included with the gun for these settings but no longer does. The install directions say I need to check the exhaust gasses to set this up and I have no idea what I need to be able to do that.
I'm thinking I can open them about 1/3 of the way just to get it running for a system test THEN call in a boiler service guy to set this up for me.
What do you think, will this plan be OK?
Or is there a rough setting based on the gun and nozzle that I can use and be close enough to the ball park?
Thanks for any help you can lend here.
Sibi