Please recommend a quality replacement diverter spout

Users who are viewing this thread

JohnnyCom

New Member
Messages
21
Reaction score
6
Points
3
Location
Sebastopol, California
I have an ongoing problem with water spraying out from the end of my tub diverter spout. I have replaced the spout more than once with the same problem. It seems like the slider type valves at the end are cheaply made and usually leaks from the start (hardware store replacement spouts). I have about a 60psi water pressure. I was hoping somebody could recommend a quality replacement part that would not leak, and possibly where to order online. Thanks for any help on this!
 

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,770
Reaction score
1,190
Points
113
Location
New England
I've seen the pros here recommend the Delta divertor tub spout. You might want to look for one of those.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks