InspectorGadget
New Member
- Messages
- 17
- Reaction score
- 0
- Points
- 0
I know that it's not good practice to use dissimilar materials when soldering, cementing, or chemical welding.
What about compression fittings?
I have ABS in the wall for drainage. Can I use PVC from the bottom of the sink, as a p-trap, and then connect the PVC directly to the ABS with a compression fitting? Any long term problems associated with this?
Steve
What about compression fittings?
I have ABS in the wall for drainage. Can I use PVC from the bottom of the sink, as a p-trap, and then connect the PVC directly to the ABS with a compression fitting? Any long term problems associated with this?
Steve