(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: Taco Freedom Flanges Failure

Hybrid View

  1. #1
    Network Engineer rmelo99's Avatar
    Join Date
    Jul 2006
    Location
    Connecticut
    Posts
    349

    Default Taco Freedom Flanges Failure

    About 2 years ago I zoned my boiler into several zones. Six at first and now it is at 8. The zoning was done with 007 circulators and I purchased Taco Shutoff Freedom flanges for each pump.

    They are 1" threaded. Today I noticed what appeared to be a leak on one of the pumps. On closer inspection I touched the upper valve and it just snapped in my hand.

    The brass valve/flange assemble just cut around where there appears to be a seam.

    Has anyone experienced anything like this on one of these valves or any other type of ball valve? Ican't figure out what would cause this other than a manf defect.

  2. #2
    Master Plumber nhmaster's Avatar
    Join Date
    Jul 2008
    Location
    S. Maine
    Posts
    2,039

    Default

    Yep, they're crap.

  3. #3
    Licensed Plumbing and heating contractor for 25 years Radster's Avatar
    Join Date
    Sep 2008
    Location
    Ontario Canada
    Posts
    5

    Default

    I have ran into problems with flanges having cracked but have not had any problems with the Taco Flange/Ballvalve setup. Gotta be a Manufacturer defect.

  4. #4

    Default

    Yes, they are crap. How should I know? I invented the modern flanged ball valves. My name is John Rocheleau and I am an HVACR tradesman with 32 years in the trade and over a hundred inventions for the trade under my belt. See my site MaverickInventor.com.

    I licensed my flanged valves and threaded and sweat flanges to Taco in 1999. Soon, they turned my high-quality concepts into cheap crap made in China. Then, mysteriously, Webstone valves cornered the market on my designs after Taco created a "sham" (so-called by my patent lawyer) of the patent application on my valves.

    I am writing a book about the harrowing life of an independent inventor and innovator.

    Contact me if you would like to know more.

    John Rocheleau
    Last edited by ProtechHVAC; 02-09-2012 at 05:55 AM.

  5. #5
    General Engineering Contractor ballvalve's Avatar
    Join Date
    Dec 2009
    Location
    northfork, california
    Posts
    3,258

    Default

    Add a chapter about the sabotage of American industry and homes by Chinese products and ethically bankrupt "American" manufacturers.

    Wall street journal, B1 Wednesday, had a good article on quite a bit of MFG. coming home due to some of these issues and transport problems - and a ton of Americans that don't live as well as many Chinese anymore.
    Last edited by ballvalve; 02-09-2012 at 10:50 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •