pilotjack
New Member
- Messages
- 7
- Reaction score
- 0
- Points
- 0
I have a new shower directly over a 2" horizontal (pitched for drain of course). The 2" line turns 90 degrees up into a wall 5'-0" away. Two lavs are connected to the vertical 2" line which continues up and vents through the roof.
So here is what I want to do. Come down from the shower 6-12" into a p-trap go horizontal from there for at least 12" then turn 90 degrees into the horizontal line about 4'-0" away from the lavs. Is this a s-trap? If so what can I do.
Also, since this will be closed in the ceiling of the space below the shower, can I make the p-trap out of PVC fittings or can I connect using compression fitting kits.
pilotjack2000@yahoo.com
So here is what I want to do. Come down from the shower 6-12" into a p-trap go horizontal from there for at least 12" then turn 90 degrees into the horizontal line about 4'-0" away from the lavs. Is this a s-trap? If so what can I do.
Also, since this will be closed in the ceiling of the space below the shower, can I make the p-trap out of PVC fittings or can I connect using compression fitting kits.
pilotjack2000@yahoo.com