Rue D'or
New Member
Gustav passed through here yesterday... we lost power around 2 p.m. and were out about 26 hours.
When the power came back on, neither the well or flushing is working. I'm chalking the flushing up to a flooded septic tank and allowing the septic pump some time to work...
however, the well i could use some help on. i turned off the breaker as soon as i realized there was a problem just to save the pump.
when i turn the breaker on you can hear power going to the pump... but the pump doesn't appear to be trying to pump.
the model is a sta-rite mse-6 and i can't find a website or anything that would give instructions on a reset button? we've had storms here before and had the power off numerous times and never had a problem with getting our water back up...
any ideas?
When the power came back on, neither the well or flushing is working. I'm chalking the flushing up to a flooded septic tank and allowing the septic pump some time to work...
however, the well i could use some help on. i turned off the breaker as soon as i realized there was a problem just to save the pump.
when i turn the breaker on you can hear power going to the pump... but the pump doesn't appear to be trying to pump.
the model is a sta-rite mse-6 and i can't find a website or anything that would give instructions on a reset button? we've had storms here before and had the power off numerous times and never had a problem with getting our water back up...
any ideas?