money_pit
New Member
I am sorry to start another thread my I unable to reply the other one.
Hi,
I am still waiting for the Well Driller to return my call.
The only things that are different from the well that has been working for 15 years is the new pump and the sanitary seal.
I found some additional information It says Water Well and Pump Record.
8/1/95 Well Depth 115ft
Rotary Household
Casing Plastic 5in to 115 ft
Bore hole 8 3/4
Height above 1 ft Weight SDR 2 lb/ft
Screen plastic Dia. 5''
9lb/gauze 20 (this is hard to read but it looks like 9lb is circled)
Length 5 ' set between 110 and 115ft
Static water level 65ft
Well grouted yes 100 to 0ft Bentonite 8 bags
I hope this helps.
Could bumping the bottom of the well with the pump a couple of times cause this problem?
I just remembered he was trying to lower it because he thought it might be getting air and added the seal so that it would suck harder and not get air.
Thanks
Hi,
I am still waiting for the Well Driller to return my call.
The only things that are different from the well that has been working for 15 years is the new pump and the sanitary seal.
I found some additional information It says Water Well and Pump Record.
8/1/95 Well Depth 115ft
Rotary Household
Casing Plastic 5in to 115 ft
Bore hole 8 3/4
Height above 1 ft Weight SDR 2 lb/ft
Screen plastic Dia. 5''
9lb/gauze 20 (this is hard to read but it looks like 9lb is circled)
Length 5 ' set between 110 and 115ft
Static water level 65ft
Well grouted yes 100 to 0ft Bentonite 8 bags
I hope this helps.
Could bumping the bottom of the well with the pump a couple of times cause this problem?
I just remembered he was trying to lower it because he thought it might be getting air and added the seal so that it would suck harder and not get air.
Thanks