Older Moen Push-Pull?

Users who are viewing this thread

vavrousek

New Member
Messages
1
Reaction score
0
Points
0
I am in the process of doing a basic bathroom remodel...I would like to know if a Moen 2353 would retro for my older Moen push-pull...valve is fine chrome is just worn (Plate, faucet...). It's wrap around shower encloser...If it sounds dumb to do that how hard would it be to change the valve, solder thru the acces hole in the encloser. Swap out for a whole new set up?? Thank you for any advice...

John V

Marysville WA
 

Kordts

In the Trades
Messages
547
Reaction score
1
Points
0
Location
exurban Chicago
Call Moen to see if what you have has upgrade options. As far as soldering in a new valve behind the surround, it's not a typical first time DIY job.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks