(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Shower head extention

  1. #1
    DIY Junior Member Johnny Drama's Avatar
    Join Date
    Jun 2008
    Location
    VA
    Posts
    15

    Default Shower head extention

    A couple of quick questions:

    1. Is there a reason to have the shower head extension over the tile line, or is this just a preference? I plan on retiling and the extension will come out below the tile line.

    2. Does the shower head extension pipe need to be soldered at the feeder line, or is tape on the threads sufficient?

    Thanks

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,653

    Default shower

    Where the arm comes out of the wall relative to the tile depends on how high you extend the tile. The shower arm is installed at a generic usable height and has nothing to do with where the tile is going to be installed.

  3. #3
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,405

    Default

    You don't need to cut holes in your tile if it is above the tile line, but no, there is no other reason to put it higher than the tile...personally, I like it tiled to the ceiling, then you have little choice. Depends on the layout. I always thought painted surfaces in a shower area, at least on the walls, was kind of dumb.

    Pipe dope might be better than tape for the shower arm, but you should be able to get it tight enough not to move with normal use and not leak with either or both. You do not want to solder it in place!
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •