Mikey
Aspiring Old Fart, EE, computer & networking geek
I draw water from the lake using a Flotec (I know...) FP5182-08 pump. There's an 80' 2" line from the lake to the dock, then a 10' rise, then another 80' 2" line to a manifold where various zones are configured and supplied via 1" lines. If the drought ever ends, the 80' line to the lake will be removed, and the rise from the lake to the pump will be a few feet. It's controlled manually -- zone(s) are turned on, and the pump is started.
I'd like to convert to a microspray system with many more zones for precision water application. I'm pretty sure this will require water storage under pressure, rather than straight from a pump, and in any event my wife doesn't like having to fuss with valves and switches.
So -- how best to do this, starting with what I've got?
I'd like to convert to a microspray system with many more zones for precision water application. I'm pretty sure this will require water storage under pressure, rather than straight from a pump, and in any event my wife doesn't like having to fuss with valves and switches.
So -- how best to do this, starting with what I've got?