How does my new shallow well sound?

Ok, here goes:

Motor and pump model: k48a34a06, SJ20
Motor amp rating: 9.4 Motor max amps: 13.9

Irrigation results:

Zone #1 with 3 heads: 82psi, 8.8 amps

Zone #2 with 5 heads: 75psi, 8.9 amps

Zone #3 with 6 heads: 71psi, 9.1 amps

Zone #4 with 9 heads: 49psi, 9.3 amps

Bob,
You are right about the increase in amps with the bigger zones, but the amps are staying below the motor's rating.

Ok, your good to go. Put a shed over the Pump so that anyone who comes along who knows about Pumps won't give you a hard time about why you have such a large Pump on such a small irrigation system.

bob...

speedbump said:

Ok, your good to go. Put a shed over the Pump so that anyone who comes along who knows about Pumps won't give you a hard time about why you have such a large Pump on such a small irrigation system.

bob...

Click to expand...

No problem, all I have to do is turn this bad boy on and prove them wrong.

No problem, all I have to do is turn this bad boy on and prove them wrong.

Click to expand...

Uh Uh UH, hold on there. You can't prove them wrong using that Pump. That's what the Dog House is for, to disguise the Pump. When you get that 3/4hp Jet Pump in there, then you can show off.

bob...

speedbump said:

Uh Uh UH, hold on there. You can't prove them wrong using that Pump. That's what the Dog House is for, to disguise the Pump. When you get that 3/4hp Jet Pump in there, then you can show off.

bob...

Click to expand...

Well, you'll be glad to hear the pump is mounted inside my shed. You wouldn't even know that I have a well. All the pipes go thru the shed floor and straight into the ground.