(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: 90 degree copper T fitting 1/2"

  1. #1
    DIY Senior Member DIY's Avatar
    Join Date
    Dec 2006
    Location
    Florida
    Posts
    150

    Default 90 degree copper T fitting 1/2"

    They carry this type of fitting i have seen in PVC. However, i have had no luck finding one in copper. Basically looking at a top view of a regular copper T fitting you see 1 pipe outlet from the top ,and the other 2 pipe outlets left and right. Just take the left or the right pipe outlet and turn it 90 degree. Thats it!...lol. I'm not sure about the name for the pipe outlets....where a copper pipe of size is sweated in anotherwords. Thanks to all!!

  2. #2
    Sprinkler Guy Wet_Boots's Avatar
    Join Date
    Mar 2007
    Location
    Metro NYC
    Posts
    798

    Default

    You probably won't find that fitting in copper. And if you produced one, it probably wouldn't sell. Try "side outlet elbow" for a search term.

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    That is used for installing lawn sprinklers, and for building PVC tents frames. I don't think you will find it in copper. If this is for a water supply, you can get there with tees and elbows. If it is for a craft project, I think you will have to make it yourself.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •