tlong_66
New Member
- Messages
- 25
- Reaction score
- 0
- Points
- 0
First of all Thanks to all those to have given such good advice in my past posts. At the moment I have one last home improvement project on my list. That is to put a new seal under a toilet and change fill/flush valve while I'm at it. The problem is with the water supply. When I go turn off the water it does not shut off completely no matter how hard I tighten it. I've tried using WD-40 and tightening the screw in the center but nothing works. So the answer of course is to change the shut off valve and water supply. What I do not know is what size or type of valve/water supply to buy. Is it 3/8 5/8 1/2 or what? I looked at Lowes's and there were so many combinations of them I was totally confused. No one who worked there was much help. Also there are different types of the valves. I have included a pic so if anyone can help I would appreciate it. Also any tips on removing /installing as I have never changed one of these. Thanks Again!
Attachments
Last edited: