JMCC
New Member
- Messages
- 3
- Reaction score
- 0
- Points
- 0
Hello all,
I just installed a vessel bowl basin in my bathroom and it looks great. However, it doesn't drain adequately. The bowl would actually overflow if I left the water running. I shortened the tail piece to see if it would help and it didn't.
I thought the problem might be the lack of an overflow on the basin, but the sink in the kitchen doesn't have an overflow and yet it drains fine. Nevertheless, would a pro-vent help?
It does have a 19-hole drain with no stopper. Could this be hamplering the flow?
Any and all advice would be welcome.
Thanks,
JMCC
Vessel bowl basin slow drainage problem
I just installed a vessel bowl basin in my bathroom and it looks great. However, it doesn't drain adequately. The bowl would actually overflow if I left the water running. I shortened the tail piece to see if it would help and it didn't.
I thought the problem might be the lack of an overflow on the basin, but the sink in the kitchen doesn't have an overflow and yet it drains fine. Nevertheless, would a pro-vent help?
It does have a 19-hole drain with no stopper. Could this be hamplering the flow?
Any and all advice would be welcome.
Thanks,
JMCC
Vessel bowl basin slow drainage problem
Last edited by a moderator: