(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: New Sink: 1-1/2" to 1-1/4" Trap to Tailpiece

  1. #1

    Default New Sink: 1-1/2" to 1-1/4" Trap to Tailpiece

    I'm installing a new console sink, and the drain pipe/trap/etc. is 1-1/2" and the tailpiece that came with the faucet is 1-1/4". Are there adapters to connect the two?

    Also, is there anything else I should pick up at the home improvement store to complete this task? It seems like everytime I start, I've got to go back to get something else (I can't think of a more frustrating place to spend my time). I have the sink, the faucet (missing a washer for the drain assembly), p-trap, tailpiece and supply lines.

    Thank you!

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Cave Creek, Arizona

    Default connection

    There are many ways to connect that pipe to the trap. The easiest for you may be a 1 1/2" x 1 1/4" slip nut and washer.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts