Iminaquagmire
DIY Senior Member
- Messages
- 206
- Reaction score
- 0
- Points
- 0
As the title states, I'm trying to figure out the rough-in for my shower drain in my basement bathroom. I've already placed the toilet drain but the whole vent and wet vent thing is confusing me. There are four stacks in the wall, one being for the toilet, one on the far right for the sink and its vent, one on the far left for the washing machine, kitchen sink, and vent, and one in the center being what I assume is the vent for a floor drain.
I can tie into the drain for the washing machine and kitchen sink but the vent line goes to 1 1/2" and I'm not sure whether that is adequate for the three drains. I could tie into the toilet drain but then the vent becomes an issue. I assume I could tie into another vent line elsewhere as long as its above the flood rim of the other fixtures attached?
I'm sorry if this seems disjointed and confusing, but I've spent a while now taking up the concrete and hauling everything away and am tired to say the least. Any help would certainly be appreciated.
I can tie into the drain for the washing machine and kitchen sink but the vent line goes to 1 1/2" and I'm not sure whether that is adequate for the three drains. I could tie into the toilet drain but then the vent becomes an issue. I assume I could tie into another vent line elsewhere as long as its above the flood rim of the other fixtures attached?
I'm sorry if this seems disjointed and confusing, but I've spent a while now taking up the concrete and hauling everything away and am tired to say the least. Any help would certainly be appreciated.