stuck foot valve

Users who are viewing this thread

wildernessj

New Member
Messages
1
Reaction score
0
Points
0
Hello, I have a 4 inch well with a 2 line system. I tryed to pull my lines up to replace or clean my foot valve and venturi but it will not come up with 2 guys pulling on it. I am afraid of breaking off the lines and not being able to get new lines down. Any suggestions?
 

Speedbump

Active Member
Messages
4,511
Reaction score
12
Points
38
Location
Riverview, Fl.
If you could go down with some 1" Pipe to the Jet and bump it downwards, you might be able to free it up. It's probably glued to the Casing with Minerals. Once you get it to move, it should come out without too much problem. Then put a Submersible Pump back in. You'll be much happier.


bob...
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks