eggtimer
New Member
- Messages
- 1
- Reaction score
- 0
- Points
- 0
I am installing three new outside water lines (2 sillcocks, and 1 sprinkler) by connecting to the 3/4 supply that also supplies my bathrooms, kitchen and water heater. The outside fausets and sprinkler are at the end of the line, and extend about 10ft from the closest drinkable supply.
I know that a backflow device is required, but standard siphon sillcocks can't be used because of clearance between the joists. I'd like to install a single inline backflow device at the end of my 3/4 supply, before it meets the T's leading to the sprinklers and sillcocks.
Unfortunally, I can't find anyone in the Seattle area who carries these things in stock, and of course, none of the big guys (*********, McClendons, etc.. could help). Anyone have any suggestions on where I can purchase one of these. I found the exact one I need from B&K (last page, top):
http://www.bk-ind.com/bkflash/pdf-folder/catalogs/pgs22-29%20Valves.pdf
Thanks in advance.
I know that a backflow device is required, but standard siphon sillcocks can't be used because of clearance between the joists. I'd like to install a single inline backflow device at the end of my 3/4 supply, before it meets the T's leading to the sprinklers and sillcocks.
Unfortunally, I can't find anyone in the Seattle area who carries these things in stock, and of course, none of the big guys (*********, McClendons, etc.. could help). Anyone have any suggestions on where I can purchase one of these. I found the exact one I need from B&K (last page, top):
http://www.bk-ind.com/bkflash/pdf-folder/catalogs/pgs22-29%20Valves.pdf
Thanks in advance.