(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Cast Iron Baseboard---shorten?

Hybrid View

  1. #1
    DIY Junior Member dachd's Avatar
    Join Date
    May 2008
    Location
    Arkansas
    Posts
    23

    Default Cast Iron Baseboard---shorten?

    Hello all!

    I've got some experience installing cast iron radiators, but I've got one here that I'm unsure about. It's the cast iron baseboard radiator pictured below. This thing has what look like 2 seams, one 4' from one end, the other 3.5' from the other end...looks like it might be 3 sections. Can these typically be shortened like the full-size cast iron rads? If so, how difficult is it to a: get the sections apart, and b: get the thing back together without leaks.

    Any help/information/links would be appreciated, Thanks!


  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,679

    Default baseboard

    Getting it apart is as easy as removing the bolt at the joint and flexing the baseboard at the seam. Getting it together without leaking will usually require new radiator nipples because the old ones will have been compressed when it was originally assembled.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •