(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: no water

  1. #1

    Question no water

    Hello, I moved into this house over a year ago, came home from work last night no water, replaced the switch at the inside tank, still nothing, does any one have any idea what else it could be??? and how do I check the wires to the pump and or well, need help bad just had to pay a few $$$$$ to get car fixed.

  2. #2
    Previous member
    Join Date
    Jul 2005
    Location
    Riverview, Fl.
    Posts
    4,540

    Default

    Did you check the breaker? Do you have a volt meter? What kind of pump; jet or submersible?

    bob...

  3. #3

    Default

    Breaker was check it is working fine, The other question how can I get you that info, I guess I should tell you I am a female, I was told by a coworker to check the wire's to the well, help

  4. #4
    Previous member
    Join Date
    Jul 2005
    Location
    Riverview, Fl.
    Posts
    4,540

    Default

    If you have a volt meter or can get someone to come take voltage readings for you; what we need is whether the voltage the pump requires comes from the breaker, through the pressure switch and possibly a control box if it's a submersible pump to the pump motor. If not, you would have to figure out why and repair that problem. Test lights etc are not volt meters and can't be trusted to test what you need tested.

    bob...

  5. #5

    Default

    Thanks I guess I will have to get someone to look at it, can not go with out water. You have been a big help. Have a great day.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •