(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Moentrol shower/tub valve question

  1. #1
    DIY Junior Member
    Join Date
    Jul 2007
    Location
    North Tustin, CA
    Posts
    9

    Default Moentrol shower/tub valve question

    I've installed a Moentrol #3570 valve in a new shower/tub, but haven't settled on the trim yet. There are a couple of styles we like, but one requires a #S935 valve. It looks to very similar to the #3570 - does anyone know what the difference is? The trim for the S935 is part of Moen's 'Show House' line, if that matters.
    Thanks,
    Bill

    Moen S935S rough-in valve
    Last edited by Terry; 03-30-2008 at 04:35 PM.

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,412

    Default

    Generally, crossing product lines with trims is not possible.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,202
    Blog Entries
    1

    Default

    It looks like a Moentrol as far as trims will go.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •