dabiz7
New Member
- Messages
- 42
- Reaction score
- 0
- Points
- 0
I am wanting to plumb in some whole house filters in the cold water side after my main shut off valve. I seem to be able to find all the 1" PVC fittings I need, but have not been able to find the PVC-to-brass male pipe thread union I need to connect the PVC loop to the rest of the house copper pipe.
I did find a 1" CPVC slip to 1" male pipe transition union, but I thought I read somewhere that you weren't supposed to mix PVC pipe in CPVC fittings. Is that right? Could I use this joint? which primer and glue would I use?
If this isn't recommended, anyone know where I can find a PVC transition, 1" slip to 1" or 3/4' male pipe thread?
Great forum, its been educational
I did find a 1" CPVC slip to 1" male pipe transition union, but I thought I read somewhere that you weren't supposed to mix PVC pipe in CPVC fittings. Is that right? Could I use this joint? which primer and glue would I use?
If this isn't recommended, anyone know where I can find a PVC transition, 1" slip to 1" or 3/4' male pipe thread?
Great forum, its been educational