Mad Plumber
Mad Skills
I have two Kohler K3434 Rosario toliets that I had to repair for a friend. We purchased two new flush valve assemblies (included the gasket and the flapper assembly) from Kohler and replaced them per the instructions. After flushing and having the tank refill, there is a leak past I think the flapper assembly. If I put some pressure on the flapper, the leak stops. I read an old (1999) E-mail sent to you with this same problem/same model but could not find your response. Was there a solution for this problem. I called Kohler and they told me to reseat the flush valve, which I did with no improvement.
Any suggestions?
Bob
Any suggestions?
Bob
Last edited: