daves
New Member
- Messages
- 10
- Reaction score
- 0
- Points
- 0
Long story short.. helped a friend remodel bathroom and went to install the old toilet. My friend cracked the fill valve so we installed a new one with new flapper and float. The toilet went in but now it seems the toilet does not have enough "gusto" to finish the flush. It also appears the the bowl does not fill up enough after each flush. (the original flapper had a little yellow float device on it) Should we have found the original parts to replace the broken ones, or are we doing something wrong?? (American Standard toilet 1.6g per flush)