Vetteski
New Member
Thanks in advance for all of the knowledge you guys share. I need to replace the check valve at my submersible pump sometime soon. I also have a check valve in the basement that keeps the pressure from draining back. We have lived here for over 11 years so the pump is older than that. I'm thinking if I must pull the pump to replace a check valve I should probably replace the pump at the same time.
According to a well report we got when we purchased the house it says the well is approx. 225 ft deep with approx. flow of 1 gallon per minute. I know this is not alot of flow but we can live with it if we don't water the lawn etc. It is 6" well casing and the level is approx. 50 ft from the surface. What size pump do I need. Thanks, Craig
According to a well report we got when we purchased the house it says the well is approx. 225 ft deep with approx. flow of 1 gallon per minute. I know this is not alot of flow but we can live with it if we don't water the lawn etc. It is 6" well casing and the level is approx. 50 ft from the surface. What size pump do I need. Thanks, Craig