rbig
New Member
I have a 1.5 StaRite on a shallow well pump. I say shallow well---because it looks like 2" pipe going into the ground. Is the pipe I see the only thing---sort of like a soda straw?
wells question
- Thread starter rbig
- Start date
Users who are viewing this thread
Speedbump
Active Member
The only way to find out is to start digging.
bob...
bob...
Sponsor
Paid Advertisement
rbig
New Member
Let's try it another way: do most shallow well surface pumps operate into one pipe?
Speedbump
Active Member
Yes and no. In your case, since you see no pipe sticking up above ground except the 2" pipe, I will assume you do not have a Pitless Adapter. With a Pitless Adapter you could have concentric piping where the suction pipe is inside the backpressure pipe which would be 2" on a two inch well.
bob...
bob...
rbig
New Member
OK. I'll pull the pump and see. It's one in which the suction is off an L fitting, so probably it's one pipe.
Similar threads
