jackcracker
New Member
Fantastic forum and very helpful!
I removed my bathroom walls (around tub - 3 wall alcove) to stud then insulated/ vapour barrier and screwed cement board to the studs. In the process of cutting the cb and installing to walls the gaps in the corners (ceiling to wall corner; wall to wall corner) are anywhere from 1/8 to almost 1 inch wide (thanks to my rookie cutting abilities-groan). What should I use to fill these large gaps or will this even be a problem when it comes to adhering the tile? Probably will go with 8 or 12 inch tile.
Thank you for your help.
I removed my bathroom walls (around tub - 3 wall alcove) to stud then insulated/ vapour barrier and screwed cement board to the studs. In the process of cutting the cb and installing to walls the gaps in the corners (ceiling to wall corner; wall to wall corner) are anywhere from 1/8 to almost 1 inch wide (thanks to my rookie cutting abilities-groan). What should I use to fill these large gaps or will this even be a problem when it comes to adhering the tile? Probably will go with 8 or 12 inch tile.
Thank you for your help.