(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Large corner gaps between installed cement board

  1. #1
    DIY Junior Member jackcracker's Avatar
    Join Date
    Feb 2008
    Location
    Ontario
    Posts
    3

    Default Large corner gaps between installed cement board

    Fantastic forum and very helpful!

    I removed my bathroom walls (around tub - 3 wall alcove) to stud then insulated/ vapour barrier and screwed cement board to the studs. In the process of cutting the cb and installing to walls the gaps in the corners (ceiling to wall corner; wall to wall corner) are anywhere from 1/8 to almost 1 inch wide (thanks to my rookie cutting abilities-groan). What should I use to fill these large gaps or will this even be a problem when it comes to adhering the tile? Probably will go with 8 or 12 inch tile.

    Thank you for your help.

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,390

    Default

    With a large format tile, it isn't as big a problem. I'd mush a bunch of thinset in there so you don't have a cavity - try to coat the edge of the cbu so it will stick. Note, you should use the reinforcement tape on the seams and corners. This is a mesh tape, but make sure you get the stuff designed for cement work - it looks like the same stuff you use on drywall, but isn't. You won't be walking on the walls, so 100% support isn't as critical.

    While some people grout corners, the industry standard is to caulk all changes of plane. You can buy color matched caulk in both sanded and unsanded consistencies.

    Next time, measure twice, cut once!

    For the best help with tiling questions, try www.johnbridge.com.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •