i have a shallow well and a new pressure tank and pump, and my problem is that i cant seem to get the pressure past 35 psi. the problem started with my old pump so i replaced it with another pump, it worked for a week and now i am back to the same problem. i can manually shut the pump off and the pressure stays at 30 psi eliminating the foot valve, i get water when the pump is on and remains at 30 psi for the duration its on so its not frozen, or at least not completely. the tube leading to the pressure switch is clear the water level to the 90 where it leaves the well is approx. 12 ft. the pressure tank doesnt seem to be filling up. i am at a loss here and was hoping someone could give me some ideas on what to check.
Last edited: