Baldensperger
Engineer
Hi! This is quite a well-viewed forum!
Nice Work Terry!
Although, I scanned through 4 pages of the forum index, I didn't see anything promising, relative to my problem...
I have a leaky kitchen faucet problem:
I am a fairly capable Do-it-yerselfer, and so when this 8-10 year-old Pull-out Sprayer-Faucet started leaking at the base, I was all over it!
I called (what I though was) the Manufacturer (we had a warranty paper, etc.), and they cooperatively sent out a new ceramic disc cartridge.
Unfortunately, as I discovered when I dissembled the faucet, they did not send me the right one. When I sent them pix of the one that came out, they said it was not theirs.
SO, I am in a jamb!
(We really, REALLY thought it was theirs, but we might have made an error - there was a purchase & return phase in the original selection & installation process)
I don't see any logo-graphic on the outside of the faucet; the only thing I see is a logo molded into the cartridge.
Hopefully, this will be the key to all this, if someone can perhaps recognize, and respond here.
(of course it may STILL be a challenge to track it down even if I DO know what it is, so please feel free to recommend sourcing!)
Thank you!!!
Chris in Minn!
Nice Work Terry!
Although, I scanned through 4 pages of the forum index, I didn't see anything promising, relative to my problem...
I have a leaky kitchen faucet problem:
I am a fairly capable Do-it-yerselfer, and so when this 8-10 year-old Pull-out Sprayer-Faucet started leaking at the base, I was all over it!
I called (what I though was) the Manufacturer (we had a warranty paper, etc.), and they cooperatively sent out a new ceramic disc cartridge.
Unfortunately, as I discovered when I dissembled the faucet, they did not send me the right one. When I sent them pix of the one that came out, they said it was not theirs.
SO, I am in a jamb!
(We really, REALLY thought it was theirs, but we might have made an error - there was a purchase & return phase in the original selection & installation process)
I don't see any logo-graphic on the outside of the faucet; the only thing I see is a logo molded into the cartridge.
Hopefully, this will be the key to all this, if someone can perhaps recognize, and respond here.
(of course it may STILL be a challenge to track it down even if I DO know what it is, so please feel free to recommend sourcing!)
Thank you!!!
Chris in Minn!