Too many bends?
- Thread starter Dmtm21
- Start date
Users who are viewing this thread
They are all vertical bends except for one.
Leejosepho
DIY scratch-pad engineer
- Messages
- 2,483
- Reaction score
- 0
- Points
- 36
- Location
- 200 miles south of Little Rock
- Website
- www.nonameyet.org
Gravity wins as long as the elevation continues to decrease.
Sponsor
Paid Advertisement
hj
Master Plumber
- Messages
- 33,603
- Reaction score
- 1,042
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
elbows
As long as the drain never plugs up, 5 elbows is okay. Once it does, however, the plumber is going to curse you and your ancestors when his snake/cable tries to go around them.
As long as the drain never plugs up, 5 elbows is okay. Once it does, however, the plumber is going to curse you and your ancestors when his snake/cable tries to go around them.
Patrick88
Plumber
The more turn you have the harder it is to snake. Drain cables are less affective the more turns and the greater the distance.
Construct30
New Member
codes require clean outs based on length and number of bends
Similar threads
