How difficult is it to make a toilet level?
We set toilets to be as flush to the floor as possible. If the floor is not level, that can make it difficult.
Unless the floor is off quite a bit, it sets whatever the floor is doing. Some are low at the back, and some low at the front.
We try to pin the front of the bowl down regardless. If has to be a pretty bad floor before we consider putting shims in the front.
The seat has a large opening in the middle, and if your lower body drops into that, I can't see you "sliding" off.
If we are setting a toilet, $179.00, we might charge $50 more to do the bidet seat at the same time. We have done so many, it's mainly muscle memory.
But the first time, read the instructions. If plumbers liked to read, they wouldn't have gone into construction.
I tell my homeowners that they better read those manuals for the plumbers. Anything out of the norm, and I swear, the homeowner does a better job.
I installed a bidet seat for my sister in-law in Hoquiam. I think my brother has the only bidet seat in the entire town now.
He helps me sometimes with the web site, so one day I drove over to the coast and installed a TOTO Drake with washlet as a thankyou.
It's not something he would have done for himself.
Step 2,
Install the mounting bracket to the bowl. Duh!
Then the seat slides into the bracket.
To pull it off for cleaning, push the indent, and it slides right out again. Cool!
Yes, it's that easy.