(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Mansfield 160 Flush Valve Seal

  1. #1

    Default Mansfield 160 Flush Valve Seal

    I am below rookie status on DIY for plumbing. I have a Mansfield 160 and it is nearly impossible to flush. I think the problem started when I used one of the 2000 Flushes with bleach. I think it hardened the flush valve seal but I might have no idea what I'm talking about. Anyways, I would like to buy a replacement flush valve seal but I have been to various hardware stores and on the Internet and all I can find is the seal for the 210/211. Am I an idiot? In order to flush the toilet I have to lift off the top of the toiet tank and release it by pulling up on the flusher. Needless to say, I am tired of this. Thanks for your help. DjM

  2. #2
    Master Plumber Dunbar Plumbing's Avatar
    Join Date
    Apr 2005
    Location
    Northern Kentucky/Greater Cincinnati Area
    Posts
    2,943

    Default

    Get rid of the chlorine in the tank; that's why you're here looking for parts.

    That seal becomes angled and the tower suctions to the seal, causing lots of problems to flush, sometimes people snapping off the trip lever.


    It is a 210/211 flush valve seal and it's a common repair part everywhere.

    Go to mansfields website if that's not possible locally.


    Make sure when you replace it that the seal free spins in the grooves, otherwise you'll be back stating it's leaking.
    Read what the end of this sentence means.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •